EMS Controller Set
- Category: Microgrid & Industry EMS
- Application: Engergy Monitoring, Load Management, Demand Response, Energy Efficiency Optimization, Renewable Energy Integration, Forecasting and Scheduling
- Benefits: Reduced Energy Costs, Improved Energy Efficiency, Automated Control, Lower Carbon Emissions, Enhanced System Reliability
- Hardwares: Local Controller, Router, Switch, Local Display and Control Terminal
- Software Operation System: Windows, iOS and Android
- Platforms URL: https://cloud.renepoly.com
- Features: Functionalities and Features
- Data Sheet:
EMS Controller datasheet -
Technical Parameters
| Power Supply | 24V DC ±2V, >20W plus DO load power required. |
| Power Consumption | 24V DC ±2V, typical power consumption of 16W. |
| DO Load Capacity | Additional power may be required for DO (Digital Output) loads. Up to 36W when 8 DO channels support external loads. (24V DC output, total current ≤1.5A, max. 0.7A per channel.) |
| Additional Power Requirement | Additional power may be requiredfor DO (Digital Output) loads. Up to36 W when 8 DO channels drive1.5 Aloads at 24 V. |
| Communication Protocol (Standard) | Modbus TCP/RTU、MQTT |
| Communication Protocol (Licensed / Chargeable options) | 60870-5-104、DNP3、OCPP、OPC-UA |
| Device System | Linux RT 6.6.48 |
| Processor | ARM A7 Dual-Core 650 MHz(Max 650 MHz)+ ARM Cortex-M4 (Max 209 MHz) |
| USB 2.0 Interfaces | 2 |
| Type-C Interface | 1 |
| TF Card Slot | 1（supports up to 128G） |
| Nano SIM Card Slot | 1（supports 4G） |
| RS485 Interface | 10 |
| CAN Interface | 1 |
| Ethernet Interface | 4 |
| Digital Input | 8, Input level meets Type 1 requirements (high-level threshold ≥ 15 V) |
| Digital Output | 8 |
| Mechinical Relay Output | 4 |
| Dimensions | 154*150*50mm |
| Weight | 420g |
| Operating Temperature | -40°C~80°C |
| Operating Humidity | 5%~95% |